Birchdistribution.co.uk

1 IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND COMPANY/UNDERTAKING Component of two part polyester resin based product F.Ball and Co.Ltd.,Churnetside Business Park,Station Road.,Cheddleton,Staffordshire ST13 7RSFor technical and non-emergency calls phone: +44(0) 870 190 6777Fax: 01538 361622E-Mail: mail@f-ball.co.uk The Full Text for all R-Phrases are Displayed in Section 16 COMPOSITION COMMENTSInert filler containing dibenzoyl peroxide The product contains calcium carbonate.
Not regarded as a health or environmental hazard under current legislation.
INHALATIONMove into fresh air and keep at rest. Get medical attention if any discomfort continues.
INGESTIONRinse mouth thoroughly. Drink plenty of water. Do not induce vomiting. Get medical attention if any discomfort continues.
SKIN CONTACTWash skin thoroughly with soap and water. Get medical attention if irritation persists after washing.
EYE CONTACTIrrigate the eyes with water or proprietary eye-wash for at least 15 minutes. Get medical attention if any discomfort continues.
EXTINGUISHING MEDIAThe product is non-combustible.
PERSONAL PRECAUTIONSAvoid inhalation of dust.
SPILL CLEAN UP METHODSAvoid dust formation. Preferably remove spillage with a vacuum cleaner. If not possible dampen with water and collect spillage with a shovel, broom or the like. Collect spillage in containers, seal securely and dispose of as low hazard waste.
USAGE PRECAUTIONSAvoid handling which leads to dust formation. Observe good industrial hygiene practices. Do not eat, drink or smoke when using the product.
STORAGE PRECAUTIONSStore in closed original container in a dry place. Keep separate from food, feedstuffs, fertilisers and other sensitive material.
INGREDIENT COMMENTS General nuisance dust levels should be controlled to WEL (8hr TWA):- 4mg/m3 respirable dust.
ENGINEERING MEASURESProvide adequate ventilation. Observe Workplace Exposure Limits and minimise the risk of inhalation of dust.
RESPIRATORY EQUIPMENTWear suitable respiratory protection. A half mask dust respirator approved to EN 149 : 2001 FFP2 is recommended. Ensure that the mask fits tightly to ensure an efficient seal.
HAND PROTECTIONFor prolonged or repeated skin contact use suitable protective gloves.
EYE PROTECTIONWear dust resistant safety goggles where there is danger of eye contact.
PERSONAL PROTECTIONAlways check applicability with your supplier of protective equipment.
STABILITYStable under normal temperature conditions and recommended use.
INHALATIONDust in high concentrations may irritate the respiratory system.
INGESTIONIngestion of small amounts is unlikely to cause a significant reaction. Larger doses may result in irritation to the gastro intestinal tract.
SKIN CONTACTProlonged or repeated exposure may cause some irritation of the skin.
EYE CONTACTMay cause temporary eye irritation.
ECOTOXICITYThe product is not expected to be hazardous to the environment.
DISPOSAL METHODSSmall quantities may be disposed of as low hazard waste. Larger quantities should be disposed of as controlled waste by a licensed waste operator.
WASTE CLASSWaste Code for Product : 080410 The product is not covered by international regulation on the transport of dangerous goods (IMDG, IATA, ADR/RID).
No transport warning sign required.
Contains BENZOYL PEROXIDE. May produce an allergic reaction.
GENERAL INFORMATIONF.Ball and Company Ltd Technical Datasheet.
INFORMATION SOURCESHealth and Safety Executive Guidance Note EH40 (amended annually). Workplace Exposure Limits.
REVISION COMMENTSSection 1: Addition of emergency telephone number. Section 8 : Improved PPE information. Section 13: Addition of waste codes. Section 2: update. Section 8: WEL update.
REVISION DATE Risk of explosion by shock, friction, fire or other sources of ignition.
May cause sensitisation by skin contact.

Source: http://www.birchdistribution.co.uk/content/downloads/coshh/PA5%20Styccobond%20Powder.pdf